SOMFY Home Motion Sonesse 30 RTS Guia De Instalacion página 11

Sun function
For this function, you need a Telis
Soliris transmitter.
By default, the Sun function is not
active.
OK
1) To activate the Sun function, press
the SELECT button on the Telis Soliris
transmitter until the shade jogs.
2) To disactivate the Sun function,
press the SELECT button on the Telis
Soliris transmitter until the shade jogs.
When the intensity of the daylight
exceeds the threshold set by the
soliris sensor RTS, a DOWN order is
sent to the shade after 2 min.
The shade goes to the MY position or
to its down limit if no MY position has
been memorised.
When the intensity of the daylight falls
below the threshold set by the
SOLIRIS sensor RTS, the shade goes
to the sun disappearing position or
stays at its position (MY or down limit)
if no sun disappearing position has
been memorised.
The Wind function is not compatible
with this motor.
Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009 9