Steelcase 488 Brody Manual Del Usuario página 17

®
Privacy Screen
Replacement
(continued)
7.
Remove all eight (8) of the M6
bolts that hold the screen attachment
brackets to the masts.
IF SCREEN IS UPHOLSTERED SKIP
AHEAD TO STEP 13.
8.
Loosen the set screw that holds
the screen in place.
9.
Gently remove acrylic screen by
sliding cast mast off from the teeth
inside the casting.
10.
Replace the acrylic screen by
sliding cast mast onto the acrylic
and reversing steps 7 & 8.
M6 BOLT
SCREEN
ATTACHMENT
BRACKET
7
MAST
M6 BOLT
T30 TORX
MAST
PRIVACY SCREEN
PRIVACY SCREEN
SCREEN
ATTACHMENT
BRACKET
Page 17 of 75
113157 Rev