Power Block Replacement - Steelcase 488 Brody Manual Del Usuario

®
Power Block
Replacement
1.
Unplug mini dash light cord from outlet.
2.
Pull bottom tab on Power Block out to
disengage from steel shroud.
3.
While holding bottom tab out, pull
Power Block downward.
4.
Pull Power Block off steel shroud.
5.
Align new Power Block at the midway
point on the steel shroud and line up
Power Block tabs with adapter slots.
6.
Slide Power Block up until snap
fit clicks into place.
7.
Manage power cord with wire
management clips.
2
3
4
6
5
7
Page 8 of
113157 Rev A