essentiel b KH6-050080EU Manual De Utilización página 25

How to charge the device
Before first use and when the battery level is low, the battery needs to be charged.
1. The trimmer must be switched off (the LCD screen should be off). Place the trimmer on
its charging base (11).
2. Fully unwind the mains adapter lead.
3. Connect the mains adapter to the base and then to a wall socket (220-240 V~).
When you plug it in, the LCD screen will light up. The battery percentage and charging
symbol will appear on the screen.
4. The device is fully charged when the number "100" appears on the screen and the
charging light stops flashing. Unplug the mains adapter from the power socket.
N
:
otes
• When charging for the first time or if the device has not been used for several months, it
may take longer to charge.
• The trimmer may heat up slightly during the charging process, which does not affect its
operation.
Fully charging the battery takes approximately 1 hour 30 minutes and gives
you approximately 2 hours of use.
25
V.1.0
charging the device