EGAmaster 79658 Manual De Instrucciones página 71

Incorrect assembly can lead to danger of accident for the operator and to defects on the
machine.
Additionally to the measures described before, it is a must to check the grease in the gear
and to fill it up or replace it, if necessary.
The correct quantity of grease (10 g) is very important with regard to good lubrication and
low warming.
Furthermore we recommend giving the pneumatic sabre saw a general overhaul by the
supplier once a year.
After completing maintenance and repair work and before restarting production make sure
that...
• all materials, tools and other equipment which are required for maintenance or repairs have
been removed from the work area of the machine,
• any fluid leaks have been removed,
• all safety devices on the machine have proper function,
• fixtures of screw connections are tight,
• removed covers, screens or filters were reinstalled.
The employer ensures that all maintenance, inspection and assembly work is done by
authorized and qualified experts.
Maintenance and repair
Disassembly and re•assembly should be done according to the exploded views, respectively
the sectional drawings (see repair instruction).
All work regarding disassembly and re•assembly, as well as maintenance and repair have to
be executed by skilled staff only.
DANGER – Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool down
to the ambient temperature.
NOTICE – Special instructions apply for the repair of explosion-proof machines.
Retrofits or modifications of the machine need the manufacturer's acceptance.
The explosion-proof machine is designed in the type of protection "c"
constructive safety.
All work executed on the machine, influencing the explosion protection, e. g.
repairs with mechanical machining, require an approval of an authorized expert
or have to be done by the manufacturer.
The internal structure must remain unmodified.
DISASSEMBLY• RE•ASSEMBLY
71