Leuze electronic LPS 36 Serie Manual Del Usuario página 16

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Light section sensors of the LxS 36 series are designed as measuring laser sensors
for object detection and for determining height profiles and object dimensions
along a projected laser line.
Areas of application
The light section sensors of the LxS 36 series are designed for the following areas
of application:
LES 36: Edge and height measurement
LPS 36: 2D/3D measurement of free-form surfaces
LRS 36: Single- or multiple-track presence and absence monitoring
CAUTION
Observe intended use!
 Only operate the device in accordance with its intended use. The protection
of personnel and the device cannot be guaranteed if the device is operated
in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by
improper use.
 Read the technical description before commissioning the device. Knowledge
of this technical description is an element of proper use.
NOTICE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the employ-
er's liability insurance association.
EN
16