Leuze electronic LPS 36 Serie Manual Del Usuario página 22

Switching outputs HIGH/LOW
Switching inputs HIGH/LOW
PROFIBUS interface (LxS 36.../PB only) RS 485, PROFIBUS DP/DPV1 slave,
Encoder interface (LPS 36.../EN only)
Analog output (LES 36.../VC6 only)
Housing
Optics cover
Weight
Connection type
Dimensions
Ambient temp. (operation/storage)
Rel. air humidity
VDE safety class
Degree of protection
Standards applied
Conformity
Certifications
1) For UL applications: only for use in class 2 circuits according to NEC.
2) Luminosity coefficient 6% ... 90%, entire detection range, at 20°C after 30minutes
warmup time, medium range U
3) Minimum and maximum values depend on measurement distance.
4) Reflectivity 90%, identical object, identical environment conditions, measurement
object  50x50mm².
5) Only with screwed-on M12 connectors or mounted caps.
6) These sensors shall be used with UL Listed Cable assemblies rated 30V, 0.5A min,
in the field installation, or equivalent (categories: CYJV/CYJV7 or PVVA/PVVA7).
 (U
-2V) / 2V ( 100mA, push-pull)
B
18 ... 30VDC / 0 ... 2VDC
9.6kBaud ... 6MBaud
24V single ended (A+, B+) or
5V differential (A+/A-, B+/B-),
max. current consumption 140mA,
max. pulse frequency 300kHz
voltage 1 ... 10V, R
current 4 ... 20mA, R
aluminum frame with plastic cover
glass,
LRS 36/6.10: plastic
approx. 620g
M12 connectors
see
2
-30°C ... +50°C / -30°C ... +70°C
max. 90% (non-condensing)
III
5)
IP 67
IEC/EN 60947-5-2
CE, CDRH
UL 508, C22.2 No.14-13
.
B
 2k and
L
 500
L
1) 6)
EN
22