Frequently Asked Questions - Miele SEB 234 Instrucciones De Operación

The Multifunction indicator lights
red.
The block protection has been
activated because the roller brush is
blocked by a vacuumed up item.
^ Turn off the vacuum immediately and
unplug it from the outlet.
^ Remove the item.
^ Press the Multifunction indicator. The
reset function resets the block
protection back to the start position.
^ Plug in the vacuum and turn it on.
All manuals and user guides at all-guides.com
en - Frequently asked questions
The powerbrush turns off
automatically - the indicator
continues to light yellow.
The thermo protection has been tripped
due to blockage of the vacuum ducts.
^ Turn off the vacuum and unplug it
^ Check the vacuum ducts and filters
The powerbrush needs to cool down.
To do this:
^ Plug the vacuum in and turn it on.
^ Engage the intake socket vertically.
The vacuum cleaner runs and cools the
powerbrush down by the airflow
through the brush.
After approx. 10 minutes the
powerbrush is ready for operation.
from the outlet.
for blockage and reassemble the
vacuum.
11