Auxiliary Terminal; Operation; On / Off - Marmitek DOORPHONE 210 Manual Del Usario

provide a 12V supply temporarily for duration of time as specified by the
TRIGGER TIME function.
Under no circumstances should AC mains Voltage be directly connected
to the terminal blocks (8)!
7.3.3

Auxiliary terminal

These two terminals act like a switch and will be short circuited as
long as the doorbell button
supply from these terminals. They can be used to trigger a conventional
door chime or a courtesy light at the entrance.
Now insert the 3 pcs AAA (UM-4) alkaline batteries into the battery
compartment as this can serve as a battery back-up in case the 12V DC
supply fails.
Install the back of the door unit onto the mounting bracket using the
supplied tool.
The door unit is housed in a high impact ABS/PC cabinet, which can
achieve the professional grade ruggedness required in most outdoor
applications. Rubber gaskets seal around all of the joints keep out dust,
rain, snow and spray, assuring years of reliable operation even in harsh
environments. The unit meets to IP-54 standard and can operate
from -20˚C to 50˚C.

8 Operation

8.1

ON / OFF

Switch on the handset by a long press (over 3 seconds) of the Power
ON/OFF button
want to switch off the unit.)
Video DoorPhone 210
(1) is pressed, however, there is no voltage
To DC supply
and electric
door lock
(15). (Long press the same button again in case you
The connecting wire can
come out from the opening at
the bottom in case not
concealed in the wall
11