Default Settings - Angelcare AC701 Manual Del Propietário

YOU ARE NOW READY
TO USE YOUR MONITOR
The Angelcare monitor can be used with the pre-program factory settings
®
or you can also customise your settings to your preference.

DEFAULT SETTINGS

Sound Mode: ON
Speaker Volume: Level 3 (of 5)
Movement Mode: ON
Sensor Pad Sensitivity: Level 3 (of 5)
TIC: OFF
Temperature Alarm: OFF
Temperature Alarm Settings:
High Temperature Limit*: 86°F / 30°C
Low Temperature Limit*: 66°F / 19°C
VOX Mode: OFF
VOX Level: Level 2 (of 4)
ECO Mode: OFF
Alarm Mode: Sound alarm only
* High/Low Temperature Setting
preset values might be different
for various countries.
NOTE:
By doing the re-connection procedure you will reset
the monitoring system back to original presets.
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
01mf9_manuel_NA_AC701_12002.indd 17
E
N
17
2014-04-17 2:39 PM