Main Menu Settings - Angelcare AC1100 Manual Del Propietário

1. MAIN MENU SETTINGS

INSTRUCTIONS
1.1 SOUND
SOUND
ICON
E
N
Sound ON
1.2 MOVEMENT
MOVEMENT
ICON
1- Press the no movement
alarm icon on Parent Unit .
All manuals and user guides at all-guides.com
UP
DOWN / MUTE
TALK-BACK
MUTE
Angelcare® Under the Mattress
Sensor pad
2- Press the top button of the
Nursery Unit.
IMPORTANT NOTE : Press the OK icon to confirm all settings
and adjustments done on the MAIN MENU.
When the screen remains idle for 1 minute, it will
automatically return to video display. In such a case, any
changes made will not be saved.
Note: When you are using the MAIN MENU screen, the sound
transmission from the Nursery Unit to the Parent Unit is
temporarily deactivated. Movement detection will remain on
if this option was enabled. To access the MAIN MENU screen
- touch the MENU icon located at the bottom right corner of
the screen.
Sound transmission from the Nursery Unit can be ON or OFF.
1. Press sound icon to activate or deactivate.
2. Press OK to confirm setting.
• Adjust the sound level with the UP (+) and DOWN (-)
buttons.
• Press and hold the DOWN (-) button for at least 2 seconds
to MUTE the sound.
• Press and hold the TALK-BACK button to talk to your baby.
Note : When the sound is on MUTE the icon on the top bar
will appear with a "X".
Movement detection is provided by the under-the-mattress
Sensor Pad.This function can be enabled (ON) or disabled (OFF).
1. Press movement icon to activate or deactivate.
2. Press OK to confirm setting.
When enabled, an alarm will be triggered when no movement
is detected for 20 seconds. If you are receiving false alarms,you
will have to adjust the Sensor Pad sensitivity in the SUB MENU.
NO MOVEMENT ALARM
• Triggered when no movement is detected by Sensor Pad
for 20 seconds.
• Parent Unit and Nursery Unit speakers will emit a loud
warning alarm.
• LCD screen display will show the alarm icon on a black
background instead of the video display.
• Check your baby immediately.
• To stop the alarm: press the alarm icon on Parent Unit LCD
(1) or press the top button of the Nursery Unit (2) and the
alarm will stop as shown.
12