Battery Alarm; Default Settings - Angelcare AC1120 Manual Del Propietário

4.2 - BATTERiES
TO ChECK BATTERY:
Unplug the Adapters from both units.
• If the green light on the Nursery Unit does not show, replace batteries.
• If the Parent Unit and its screen do not light up, recharge the batteries.
TO ChARGE PARENT UNiT BATTERiES:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
YOU ARE NOW READY
TO USE YOUR MONiTOR
The Angelcare
®
or you can also customize your settings to your preference.

DEFAULT SETTiNGS

Sound Mode: ON
Speaker volume: Level 3 (of 6)
Temperature Unit: Celsius
Temperature Alarm: OFF
Maximum Temperature Limit: 30
Minimum Temperature Limit: 19
vOx Mode: ON
vOx Level: Level 2 (of 4)
Timer: OFF
Alarm Mode: Sound alarm only
video Camera: ON
iMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
12
monitor can be used with the pre-program factory settings
C / 86
o
o C / 66

BATTERY ALARM

• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 15 seconds.
• Battery Alarm icon will show on LCD screen.
F
o
o F
1/3 full 2/3 full full