Changing Lan Settings - Belkin F5D7632 Manual De Usuario

Manually Configuring your Router

Changing LAN Settings

All settings for the internal LAN setup of the Router can be viewed and
changed here.
LAN Settings
Clicking on the header of the LAN tab (A) will take you to the
LAN tab's header page. A quick description of the functions can
be found here. To view the settings or make changes to any of
the LAN settings, click on "LAN Settings" (B) or to view the list
of connected computers, click on "DHCP Client List" (C).
1. IP Address
The "IP address" is the internal IP address of the Router. The default
IP address is "192.168.2.1". To access the setup interface, type this
IP address into the address bar of your browser. This address can
be changed if needed. To change the IP address, type in the new
IP address and click "Apply Changes". The IP address you choose
should be a non-routable IP. Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2. Subnet Mask
There is no need to change the subnet mask. This is a unique,
advanced feature of your Belkin Router.
19 19
1
2
3
4
5
6
7
8
9
10