Belkin F5D7632 Manual De Usuario página 24

Manually Configuring your Router
1. User Name
2. Password
- Enter your password. (Assigned by your ISP).
3. Retype Password
(Assigned by your ISP).
4. IP Assigned by ISP
assigns IP address. If your ISP assigned a fixed IP address,
select "No" and enter assigned values.
5. VPI/VCI
- Enter your Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) parameter here. (Assigned by your ISP).
6. Encapsulation
your ISP) to specify how to handle multiple protocols at the
ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer
(null encapsulation) allows only one protocol running per virtual
circuit with fewer overheads. LLC: PPPoA Logical Link Control
allows multiple protocols running over one virtual circuit (more
overhead).
7. Dial on Demand
will automatically connect to the Internet when a user opens up a
web browser.
8. Idle Time (Minutes)
Internet connection. After this time has been exceeded, the
connection will be terminated.
9. MTU
- The MTU setting should never be changed unless your you
a specific MTU setting. Making changes to the MTU can cause
problems with your Internet connection including disconnection
from the Internet, slow Internet access and problems with
Internet applications working properly.
- Enter the user name. (Assigned by your ISP).
- Confirm the password.
– Leave "Yes" if your ISP automatically
- Select your encapsulation type (supplied by
- By selecting "Dial on Demand" your Router
- Enter the maximum idle time for the
24 24