Belkin F5D7632 Manual De Usuario página 81

Troubleshooting
Problem:
I can't connect to the Internet wirelessly,
and my network name is not listed.
Solution:
If the correct network name is not listed under
"Available Networks" in the wireless utility, please
attempt the following troubleshooting steps:
1.
Temporarily move computer, if possible, five to 10 feet
from the Router. Close the wireless utility, and re-open it.
If the correct network name now appears under "Available
Networks", you may have a range or interference problem.
Please see the suggestions discussed in Appendix B
entitled "Important Factors for Placement and Setup".
2.
Using a computer that is connected to the Router via a
network cable (as opposed to wirelessly), ensure that
"Broadcast SSID" is enabled. This setting is found on the
Router's wireless "Channel and SSID" configuration page.
If you are still unable to access the Internet after completing
these steps, please contact Belkin Technical Support.
Problem:
• My wireless network performance is inconsistent.
• Data transfer is sometimes slow.
• Signal strength is poor.
• Difficulty establishing and/or maintaining a
Virtual Private Network ( VPN) connection.
Solution:
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors
that will cause signal degradation (metal is generally the worst
culprit) are obstructions such as walls and metal appliances. As
a result, the typical indoor range of your wireless devices will be
between 100 to 200 feet. Note also that connection speed may
decrease as you move farther from the Router or Access Point.
81 81
1
2
3
4
5
6
7
8
9
10