Belkin F5D7632 Manual De Usuario página 29

Manually Configuring your Router
Channel and SSID
1)
2)
3)
4)
1. Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set
Identifier) is used. The default SSID of the Router is "belkin54g". You
can change this to anything you want to or you can leave it unchanged.
If there are other wireless networks operating in your area, you will want
to make sure that your SSID is unique (does not match that of another
wireless network in the area). To change the SSID, type in the SSID
that you want to use in the SSID field (1) and click "Apply Changes"
(2). The change is immediate. If you make a change to the SSID, your
wireless-equipped computers may also need to be reconfigured to
connect to your new network name. Refer to the documentation of your
wireless network adapter for information on making this change.
2. Using the ESSID Broadcast Feature
For security purposes, you can choose not to broadcast your
network's SSID. Doing so will keep your network name hidden from
computers that are scanning for the presence of wireless networks.
To turn off the broadcast of the SSID, select "DISABLE" and then
click "Apply Changes". The change is immediate. Each computer
now needs to be set to connect to your specific SSID; an SSID of
"ANY" will no longer be accepted. Refer to the documentation of your
wireless network adapter for information on making this change.
Note: This advanced feature should be employed by advanced users only.
29 29
1
2
3
4
5
6
7
8
9
10