Belkin F5D7632 Manual De Usuario página 97

Appendixes
can leave the public IP to "0.0.0.0". If you are using multiple public (WAN) IP
addresses, it is possible to select which public (WAN) IP address the DMZ
host will be directed to. Type in the public (WAN) IP address you wish the
DMZ host to direct to, enter the last two digits of the IP address of the DMZ
host computer, and click "Apply Changes".
Administrator Password
The Router ships with NO password entered. If you wish to add a password
for more security, you can set a password from your Router's web-based user
interface. Keep your password in a safe place as you will need this password
if you need to log into the Router in the future. It is
that you set a password if you plan to use the remote management feature.
The login time-out option allows you to set the period of time that you can
be logged into the Router's advanced setup interface. The timer starts when
there has been no activity. For example, you have made some changes in
the advanced setup interface, then left your computer alone without clicking
"Logout".
Assuming the time-out is set to 10 minutes, then 10 minutes after you leave,
the login session will expire. You will have to log into the Router again to
make any more changes. The login time-out option is for security purposes
and the default is set to 10 minutes. Note, only one computer can be logged
into the Router's advanced setup interface at a time.
Time and Time Zone
The Router keeps time by connecting to a Simple Network Time Protocol
(SNTP) server. This allows the Router to synchronize the system clock to the
global Internet. The synchronized clock in the Router is used to record the
security log and control client filtering. Select the time zone that you reside
in. If you reside in an area that observes daylight saving time, then place a
check mark in the box next to "Enable Daylight Saving". The system clock
may not update immediately. Allow at least 15 minutes for the Router to
contact the time servers on the Internet and get a response. You cannot set
the clock yourself.
Remote Management
Before you enable this function,
ADMINISTRATOR PASSWORD
changes to your Router's settings from anywhere on the Internet.
MAKE SURE YOU HAVE SET THE
. Remote management allows you to make
97 97
STRONGLY RECOMMENDED
1
2
3
4
5
6
7
8
9
10