Base Plate Position - entrematic Ditec NeoS Manual De Instrucciones

7.2 Base plate position

[1] Insert the anchor ties into the base plate and fix them with the supplied nuts.
[2] Insert the screws in the base plate, secure them with the nuts and then bend the metal tab to
prevent the screw from coming out.
Extract the preformed ties with a downwards movement using a hammer to ensure correct
anchorage to the concrete.
- Make a concrete base with the anchor ties and base plate embedded, which must be level and
clean and of the size indicated in the figure.
i
NB: if the concrete base has already been made, base plate [2] can be fixed using M8
plugs (not supplied).
1
[*] CROSSCRI
[*] CROSSCRN2
X=40
[**] NES100CKT
2
[*] CROSSCRI
[*] CROSSCRN2
X=40
[**] NES100CKT
X+25 [*]
70[**]
X+25 [*]
70 [**]
OPENING
Ø80
300
335 min
40 [**]
OPENING
Ø60
Ø9
300
min
40[**]
340
37
90°
1
M12
NES100PSU
low type
M12
low type
2a
2b
M12-low
type