Bissell PROHEAT 2X REVOLUTION 1548 Serie Guia Del Usuario página 10

Filling Your Clean Water Tank (cont.)
BISSELL® 2X® Concentrated Formula
1
3
Unscrew the cap from the Clean Water Tank. Add hot
tap water to the water fill line. Next, reference the
chart below for formula amounts to add to the tank.
Twist cap back into place.
FORMULA FILLING
INSTRUCTIONS
BISSELL 2X®
Concentrated Formulas
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula with other household
cleaning products.
10
www.BISSELL.com
Clean Water Tank
(1 Gallon)
Dirty Water Tank
The Clean Water Tank is at
the top of the machine.
DEEP CLEAN MODE
Fill water to the Water
Fill Line, then add 2.5 oz
of formula.
Pour in more power with BISSELL Boosts
» Fill tank with water and 2X® formula (step 3 above).
» Add 2 ounces of any BISSELL Boost per 1-gallon of water.
» The ProHeat 2X® Revolution™ has a 1 gallon Clean Water Tank.
2
Lift the Clean Water Tank
straight up to remove from
the machine.
4
At the bottom of the Upper
Handle, align the Clean
Water Tank with the grooves
and slide the tank into place.
EXPRESS CLEAN MODE
Fill water to the Water
Fill Line, then add 1.25 oz
of formula.