Temperature Alarm - WD Plus Bearware 303456/20191119HK016 Manual Del Usuario

Note: You can turn the alarm on and off once the alarm time is displayed. You can
not turn the alarm on or off in the clock mode.
Switching off the alarm
When the alarm is activated at the configured time, the backlight also turns on
automatically. The alarm is active for 2 minutes before it turns off automatically.
Press the "SNOOZE/LIGHT" button to cancel the alarm. If a snooze symbol is shown
on the display, this means that the snooze function is activated and the alarm will
go off again in 5 minutes.
Press and hold the "Snooze / Light" button or press the "Alarm" button to turn off
the alarm. The alarm will go off again at the same time on the next day.

7.3 Temperature alarm

When the outside temperature drops below 3°C, a " " symbol is shown in the
display.
7.4 Backlight
Move the "Backlight" switch to the desired position:
• OFF = Backlight off
• LO = Backlight level 1
• HI = Backlight level 2
When the backlight is turned on, press the "Rainbow" button to change
the colour of the backlight. The backlight changes colour as follows:
white-> red-> orange-> yellow-> green-> cyan-> blue-> purple.
Turn the "Color" button in clockwise or counter-clockwise direction to set the back-
light colour individually as desired. Press the "Color" button to enable the colour
change mode. The colour change is disabled when the backlight is changed.
23
English