WD Plus Bearware 303456/20191119HK016 Manual Del Usuario página 25

8. Display
Time display:
The time can be displayed in a 12-hour or 24-hour format. The desired format can
be selected in the basic settings.
Date and day:
The weather station has a date and day display. The day is marked with "D" and
the month with "M". Details are shown on the left side of the display. If you wish
to change the language, please refer to the section on "Basic settings" for more
details.
DCF symbol:
The weather station synchronises the time every night. The symbol begins flash-
ing during synchronisation. If the time has been successfully received, then the
symbol glows continuously until the next synchronisation.
Indoor temperature display:
The indoor temperature is measured by the base station and is shown to an ac-
curacy of one tenth of a degree. The configured temperature unit is displayed to
the right of the measured value. The temperature unit can be changed between
°C and °F. To do this, slide the °C / °F switch on the back of the weather station to
the desired position.
Humidity:
This display shows the current air humidity experienced by the weather station.
Low battery:
If the battery symbol appears, then the inserted batteries are discharged and
should be replaced with new batteries as soon as possible. This applies to the out-
door sensor as well as to the base station. If the empty battery icon appears next
to the inside temperature, the backup battery of the weather station is empty.
25
English