WD Plus Bearware 303456/20191119HK016 Manual Del Usuario página 27

DCF signal
The base station synchronises the internal clock every night with the DCF signal.
To receive the DCF signal manually, press the "RCC" button in the battery com-
partment of the outdoor sensor. The base station shows the DCF symbol " "
in the display. The symbol flashes when the station is attempting to receive the
signal.
When the signal is received successfully, the symbol will glow continuously. If the
signal is not received, the symbol disappears.
Receiving the outdoor sensor signal
The outdoor sensor sends a signal twice a minute, which is automatically received
by the base station. You can also manually enable the signal reception. Press the
"Sensor" button on the back of the device until the scan icon (" ") starts flash-
ing. Once the signal has been successfully received, the animation of the symbol
disappears and the received temperature and humidity is shown on the display of
the weather station.
Caution!
11. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
therefore please use it only in dry surroundings. Protect it from high humidity, wa-
ter and snow. Do not expose the appliance to high temperatures.
Do not expose the appliance to sudden changes in temperature or strong vibra-
tions, as this could damage the electronic components. Check the appliance for
any damage before using it. The appliance should not be used if it was subject
to impact or has been damaged in some other manner. Please comply with the
local regulations and restrictions. Do not use the appliance for purposes other than
those described in the user manual. This product is not a toy. Keep it out of the
reach of children or mentally disabled persons.
Any repairs or modifications to the appliance not carried out by the original suppli-
er will void any warranty and guarantee claims. The appliance should be used only
by persons who have read and understood this user manual. The specifications of
the device may be changed without special prior notice.
27
English