Astralpool JELLY Manual De Instalación Y Mantenimiento página 6

COLOrPLus ECO: PusH BuTTON CONTrOL
The system features 14 operational modes: 7 fixed colours and 7 different colour sequences.
With each short stroke, you can make a colour or sequence change. With a long stroke, you
give the projector(s) a white colour.
Electrical connection diagram
The ColorPlus Eco system is composed of the
projector(s), the transformer and the push button,
which is normally close (NC).
The transformer must be large enough to supply 60VA
per led lamp that is connected to it. For example, if
you wish to control 5 lamps, you must connect them
in parallel to a 300VA transformer minimum. The push
button must be able to bear the power consumed by
the number of projectors used in the installation.
Operational modes
The ColorPlus ECO ensemble allows you to create different lighting scenes inside the pool with
two operational possibilities:
Fixed colour: Selection of a fixed colour among seven possible colours:
COLOr NuM.
1
2


5

7
Automatic colour sequence: Selection among seven colour sequence programmes. Each
programme is defined by the time each colour is present and the duration of the transition from
one colour to another as per the following table:
sEQuENCE
1 Red Blue
2 Red Green
 Purple Cyan
 Red Blue
5 Purple Cyan
 Yellow Purple
7 Green Red
S I G N A T U R E
% rED % BLuE
100 100
100 0
0 100
0 0
100 100
0 100
100 0
OrDEr OF THE COLOurs
Green Purple Cyan
Cyan Blue Purple
Yellow - -
Green - -
Yellow - -
Cyan - -
Blue - -

% GrEEN COLOur
100 White
0 Red
0 Blue
100 Green
0 Purple
100 Cyan
100 Yellow
COLOur TIMING
MIX TIMING (sEC.)
(sEC.)
Yellow 2
Yellow 
- 
- 8
- 18
- 0,5
- 0,5
2


8
18
0,5
0,5