Abicor Binzel ABIPLAS WELD 100 Instructivo De Servicio página 22

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Personal protective equipment
(PPE)
2.3 Classification of the warnings
2.4 Special warnings for operation
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Signs and symbols used
3.4 Nameplate
4 Scope of delivery
5 Functional description
6 Putting into operation
6.1 Setting up the ABIPLAS
torch body
6.2 Attaching the cable assembly to
the device
6.3 Connecting the coolant
6.4 Setting the shielding gas volume EN-16
7 Operation
7.1 Before switching on
7.2 Welding process
8 Putting out of operation
EN - 2
EN-3
EN-3
EN-3
EN-3
EN-3
EN-4
EN-4
EN-5
EN-5
EN-5
EN-8
EN-8
EN-9
EN-9
EN-10
EN-11
®
WELD
EN-12
EN-14
EN-15
EN-17
EN-18
EN-18
EN-18
9 Maintenance and cleaning EN-19
9.1 Cable assembly
9.2 Torch body
10 Troubleshooting
11 Disposal
®
ABIPLAS WELD
EN-20
EN-20
EN-21
EN-23
BAL.0092 • 2020-12-17