®
ABIPLAS
WELD
2.5 Emergency information
3 Product description
3.1 Technical data
Welding
Transport and storage
Relative humidity
Tab. 1
Ambient conditions during operation
®
Type ABIPLAS
WELD
Type of use
Voltage rating
Max. arc inflammability and
stabilisation voltage
Breakdown voltage 50 Hz
Protection type of the device
connections (EN 60529)
Type of cooling
Tab. 2
Product-specific torch data (EN 60974-7)
BAL.0092 • 2020-12-17
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Coolant supply
• Gas supply
Further measures can be found in the operating instructions for the power
source or the documentation for other peripheral devices.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and
material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without
authorisation.
• The device must only be used by qualified personnel (in Germany, see
TRBS 1203).
−10°C to +40°C
−25 °C to +55 °C
Up to 90% at 20°C
100 W / 100 W MT
3 Product description
150 W / 150 W MT
Manual/automatic
Peak value of 113 V (manual)
Peak value of 141 V (automatic)
7 kV
IP3X (manual)
IP2X (automatic)
Liquid
EN - 5