Cleaning The Tool; Environmental Protection; Declaration Of Conformity - Worx WG569E Traducción De Las Instrucciones Originales

CLEANING THE TOOL

Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with water.
—To clean the tool, use only mild soap and a damp
cloth.
—Do not use any type of detergent, cleaner or
solvent which may contain chemicals that could
seriously damage the plastic.
—Self lubricating bearings are used in your
product, therefore lubrication is not required.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
12
Cordless Li-Ion Blower
DECLARATION OF
CONFORMITY
Wir,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description Battery-operated Blower
Type WG569E WG569E.9 (5-designation of
machinery, representative of Cordless Blower)
Function blowing
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 96.6dB(A)
- Declared Guaranteed Sound Power Level 98dB(A)
Standards conform to,
EN 60335-1
EN 50636-2-100
EN 62233
EN ISO 3744
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/12/05
Allen Ding
Deputy Chief Engineer,
Testing & Certification
EN