Cleaning The Tool - Worx WG580 Manual Del Usuario

Blowing
USER TIPS
• Hold the blow tube approx
8" above the ground when
operating the tool.
Use a sweeping motion from
side to side. Advance slowly
keeping the accumulated
debris/leaves in front of you.
• After blowing the debris/
leaves into a pile, it is easy to
dispose of the pile.
CAUTION!
• Do not blow hard objects
such as nails, bolts, or rocks.
• Do not operate the blower
near bystanders or pets.
• Use extra care when cleaning
debris from stairs or other
tight areas.
• Wear safety goggles or other
suitable eye protection, long
pants, and shoes.
10

CLEANING THE TOOL

Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with
water.
• To clean the tool, use only mild soap and a
damp cloth.
• Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
could seriously damage the plastic.
• Self lubricating bearings are used in
your product, therefore lubrication is not
required.
40V Max Lithium Cordless Blower
See Fig. G
EN