Impedance Match Settings - ATON AVC100SL Manual Del Usuario

Impedance Match Settings

Switch and Jumper settings on the AVC100SL and AVC100Rdetermine the
Impedance Match settings. See diagram for location of Switches and Jump-
ers. These setting positions depend on three things:
1. The minimum impedance rating of the amplifier used
2. The number of speakers being connected to the amplifier.
3. The nominal impedance of the speakers being utilized.
Once the above information has been determined, use the following equa-
tions to determine the correct Impedance Match setting for each specific
application. Two equations are neccessary:
Impedance Rating of Speakers
# of Speakers Connected to Amp Channel
Minimum Impedance Rating of Amp
System Impedance
8 Ohm Speaker
4 Speakers
8 Ohm Stable Amp
2 Ohm System Impedance
©ATON 2010 • All rights reserved.
VOLUME CONTROL INSTALLATION MANUAL
= 2 Ohm System Impedance
= 4 X Setting
= System
Impedance
= Impedance
Match Setting
Page 7