Operation - ATON AVC100SL Manual Del Usuario

Operation

Once the AVC100SL / AVC100R is connected to both amplifier and
speakers, adjustment and testing can occur.
1. When using a receiver or integrated amplifier with its own Volume
functions, turn the Volume all the way down.
2. Turn Volume all the way up on the AVC100SL / AVC100R, and then
slowly adjust the volume on the receiver until a comfortable listening
level is obtained.
3. Leave the receiver's Volume at that level and adjust Volume from the
AVC100SL / AVC100R.
4. When connected directly to an amplifier, follow the above procedures,
but adjust the amlifier's Gain Control rather than the Volume knob of a
receiver.
5. Once the gain has been established, no further adjustment should be
necessary.
©ATON 2010 • All rights reserved.
VOLUME CONTROL INSTALLATION MANUAL
Page 11