English; Safety Notes; Product Description And Specifications; Intended Use - Bosch GPL 5 Professional Manual Original

English

Safety Notes

Point Laser
All instructions must be read and observed
in order to work safely with the measuring
tool. Never make warning signs on the
measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE AND INCLUDE THEM WITH THE MEAS-
URING TOOL WHEN GIVING IT TO A THIRD
PARTY.
 Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
 The measuring tool is provided with a warning label
(marked with number 5 in the representation of the
measuring tool on the graphics page).
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Bosch Power Tools
IEC 60825-1:2007-03
< 1 mW, 635 nm
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Keep the measuring tool and the holder 8
away from cardiac pacemakers. The mag-
nets inside the measuring tool and the holder
12 generate a field that can impair the func-
tion of cardiac pacemakers.
 Keep the measuring tool and the holder 8 away from
magnetic data carriers and magnetically sensitive de-
vices. The effect of the magnets inside the measuring tool
and the holder 12 can lead to irreversible data loss.

Product Description and Specifications

Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for determining and checking
horizontal and vertical lines as well as plumb points.

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Latch of battery lid
3 Battery lid
4 On/Off switch
5 Laser warning label
6 Tripod mount 1/4"
7 Serial number
8 Holder
9 Locking screw for holder
10 Screw holes of holder
11 Opening for strap attachment
12 Magnets
13 1/4" tripod mount on holder
14 5/8" tripod mount on holder
15 Measuring plate with stand*
16 Protective pouch
17 Laser viewing glasses*
18 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
English | 9
1 609 92A 0KX | (15.5.14)