Bosch Zamo Manual Original página 28

OBJ_BUCH-2820-001.book Page 28 Tuesday, March 22, 2016 8:57 AM
28 | English
 Do not point the laser beam at per-
sons or animals and do not look into
the laser beam yourself, not even
from a large distance.
Working Advice
General Information
The reception lens 7 and the laser beam
outlet 8 must not be covered when tak-
ing a measurement.
Measurement takes place at the centre
of the laser beam, even when target sur-
faces are sighted at an incline.
Troubleshooting – Causes and
Corrective Measures
Cause Corrective Measure
Temperature warning indicator (b)
flashing; measurement not possible
Measuring tool Wait until the meas-
not within the uring tool has
operating tem- reached the operat-
perature range ing temperature
between – 10 °C
and +40 °C.
1 609 92A 2HT | (22.3.16) Bosch Power Tools