Kohler K-1737 Guia De Instalacion página 3

Temperature
Sensor
5"
(12.7 cm)
4-1/2"
(11.4 cm)
Steam
Head
K-1569/K-1669
21" (53.3 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
21" (53.3 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
Steam Hardware Locations
Modules (Single Steam Head)
WARNING: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head
is hot during operation and may scald the user if touched.
NOTICE: The temperature sensor and user interface must be mounted on the wall opposite the steam
head. For optimum performance, reference the diagrams above. Locate the steam head 6" (15.2 cm) above
the floor and a minimum of 4-1/2" (11.4 cm) from the threshold. The steam head should always be located
as far away from the seating area as possible.
Identify the model number of your shower module in the illustration. If necessary, consult the
Homeowners Guide included with your shower module to verify the model number. If the
dimensions for your particular model are not shown, refer to the "Custom Shower Application"
illustration in the "Prepare the Site" section.
Kohler Co.
12"
(30.5 cm)
Steam
6" (15.2 cm)
Head
Temperature
Sensor
4-1/2"
(11.4 cm)
Drain End
K-1683/K-1684
Temperature
Sensor
4-1/2"
(11.4 cm)
Drain End
K-9486/K-9489
Temperature
21"
Sensor
(53.3 cm)
5"
(12.7 cm)
11"
(27.9 cm)
6"
(15.2 cm)
Steam
Head
K-1687
Steam
Head
Drain End
Steam
Head
Drain End
3
Temperature
Sensor
5"
(12.7 cm)
11"
(27.9 cm)
6"
(15.2 cm)
Steam
Head
K-1688
Temperature 21" (53.3 cm)
Sensor
4-1/2"
(11.4 cm)
K-1681/K-1682
Temperature 21" (53.3 cm)
Sensor
4-1/2"
(11.4 cm)
K-9488/K-9496
21"
(53.3 cm)
Steam
Head
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
1069332-2-B