Aux Connection; Switching Off The Wake Up Light; Cleaning And Maintenance - Beurer WL 50 Instrucciones De Uso

7.9 AUX connection

You can connect an external audio source (e.g. MP3 player, smartphone or CD player) to the
wake up light via the AUX input.
1. Connect the supplied AUX cable to an audio source (e.g. smartphone).
2. Insert the other end of the AUX cable into the AUX input on the rear of the wake up light.
3. Press the Mode button three times. AUX appears in the display. The external audio source is
now connected to the wake up light.
4. The music settings can only be adjusted on the paired device, not on the wake up light itself. It
is also possible to adjust the volume on the wake up light.
5. Press the Mode button to exit AUX mode again.

7.10 Switching off the wake up light

Note
All saved data is lost when the wake up light is switched off.
• To switch off the wake up light, slide the
position.

8. Cleaning and maintenance

• Clean the device with a dry cloth.
• Do not use any abrasive cleaning products.
On | Off switch on the rear of the device to the "Off"
48