For New Zealand Customers; General Warning; For Mexican Customers - Mitel SMB Manual Del Usario

CAUTION!
Users should not attempt to make such
connections themselves, but should
contact the appropriate electric inspec-
tion authority, or electrician, as appropri-
ate.
The Ringer Equivalence Number (REN) indicates
the maximum number of devices allowed to be
connected to a telephone interface. The termi-
nation on an interface may consist of any com-
bination of devices subject only to the require-
ment that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
The Ringer Equivalence Number is 0.1.
There are no user serviceable parts within this
equipment. Refer all servicing to a MITEL autho-
rized repair facility or to MITEL Corporation. If
you require a MITEL return authorization num-
ber, or information on obtaining service or
repairs, please contact MITEL at the following
telephone number:
1-800-SXMITEL (1-800-796-4835)
A MITEL return authorization number must be
obtained before sending equipment to the
MITEL repair facility.
Repair facility MITEL Corporation
350 Legget Drive
Kanata, Ontario
Canada K2K 2W7

FOR MEXICAN CUSTOMERS

The following information is provided on the
device(s) described in this document in compli-
ance with the requirements of the official Mexi-
can standards (NOM).
Exporter: Mitel Corporation
350 Legget Drive,
Ottawa, Ontario,
K2K 2W7, Canada.
12
Importer / Mitel Mexico
Ship to: Bosques de Alisos #47-A
Interior A2-02-Officina 106
Colonia Bosques de las Lomas
Delegación Cuajimalpa
México, D.F. - CP 05120
External power supply unit:
• Supply Voltage: 100-240 VAC
• Frequency: 50-60 Hz
• Current: 1.5 A
Mitel SMB Controller:
• 19 VDC / 3.42 A

FOR NEW ZEALAND CUSTOMERS

General Warning

The grant of a Telepermit for any item of termi-
nal equipment indicates only that Telecom has
accepted that the item complies with minimum
conditions for connection to its network. It indi-
cates no endorsement of the product by Tele-
com, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item
will work correctly in all respects with another
item of Telepermitted equipment of a different
make or model, nor does it imply that any prod-
uct is compatible with all of Telecom's network
services.