Lock Adjust Adjusting Hour Minutes And Day; Auto On/Off; Day Off Adjustment - Expobar Diamant Manual De Usuario

18.3. Clock adjust: adjusting hour, minutes and day.
Once pressed the button "two short coffees" (OK) while "Clock adjust" was displayed, the adjusting of the clock
begins.
Adjust the hour: while the hour is blinking, increase or decrease its
value by pressing "+" (one short espresso) or "-" (one large
coffee). When the right value is reached, accept it by pressing
"OK" (two short espressos). Then it begins with the minutes
adjusting.
While the minutes are blinking, we can increase or decrease its value by pressing "+" (one short
espresso) or "-" (one large coffee). When the right value is reached, accept it by pressing "OK" (two
short espressos). Then the day of the week can be adjusted in the very same way ("+", "-" & "OK").
After having adjusted all previous values, when pressing "OK" (two short espressos) the "Auto On" / "Auto Off"
menus are shown.

18.4. Auto On/off:

After accepting the adjusting made in the time & day by pressing "OK" (two short coffees), we enter in the
programming of the automatic connection and disconnection of the machine.
As to modify the time at which the machine automatically gets into the
"ON" status: While the hour is blinking, , increase or decrease its
value by pressing "+" (one short espresso) or "-" (one large
coffee). When the right value is reached, accept it by pressing
"OK" (two short espressos). Then the minutes will blink, and will
be adjustable in the same way than the hour ("+", "-" & "Ok").
Note: By default, this first value will be: On: - - : - - this means that the function is disabled. As soon as
we modify the value, and it become different from - - : - - the function will be enabled. If we prefer to
leave this function disabled, just accept by pressing "OK" while the adjusted value is - - : - - .
Now, while the auto-disconnection time blinks, increase or decrease its
value by pressing "+" (one short espresso) or "-" (one large
coffee). When the right value is reached, accept it by pressing
"OK" (two short espressos). Then the minutes will blink, and will
be adjustable in the same way than the hour ("+", "-" & "Ok").
With this final acceptance, we will proceed to the next adjusting
menu.

18.5. Day Off adjustment:

If automatic On and Off times have been assigned, a day off can be enabled
in which the machine will not switch on: the day off.
Note that if the function of Auto On/Off was not enabled, this menu will not
appear.
To adjust the day Off, press "+" (one short espresso) or "-" (one large coffees,
as needed, till reaching the desired value; then accept it by pressing "OK"
(two short espressos).
Note: By default, this setting will be: - - : - - this means that the function is disabled. As soon as we
modify the value, and it become different from - - : - - the function will be enabled. If we prefer to
leave this function disabled, just accept by pressing "OK"(two short espressos) while the adjusted
value is - - : - -
• Aditional capabilities reachable from the display
19
Clock Adjust
HH:MM Day
1 short espresso +
1 long espresso -
2 short espressos OK
Continuous to confirm
Auto On/Off
On: Hh:mm
1 short espresso +
1 long espresso -
2 short espressos OK
Continuous to confirm
Auto On/Off
Off: Hh:mm
1 short espresso +
1 long espresso -
2 short espressos OK
Continuous to confirm
Closed on
Day
1 short espresso +
1 long espresso -
2 short espressos OK
Continuous to confirm
English