Front Panel - Velleman NVR5 Guía Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

high compatibility and offsite backup:
compatible with all major IP cameras that are ONVIF certified
added NAS function to back up all kind of IP cameras on the internet
works with free Central Management System (CMS) software for offsite backup
local and remote control completely independent
HDMI video output resolution up to 1080p
automatic integrated Dynamic Domain Name Service (DDNS): free service
USB mouse: incl.
IR remote control: incl.
Optional hardware
hard disk: HD500GB/S, HD1TB/S, HD2TB/S
monitor: MONSCA9
HDMI cable: Professional or Premium
suitable IP cameras: CAMIP11, CAMIP12, CAMIP16, CAMIP17, CAMIP18, CAMIP19
also compatible with: CAMIP9, CAMIP13, CAMIP14 & ONVIF cameras
router: EM4544, EM4543, EM4571, PCRT1
5.
Overview

Front panel

Power
alarm
wan
lan
SATA
HDD1 and HDD2
USB port
mouse port
Back panel
1
eSATA
2
WAN
3
LAN
V. 01 – 14/04/2014
LED indicator: the NVR is switched on
LED indicator: an alarm event occurs
LED indicator: the NVR is connected to internet
LED indicator: the NVR is connected to the LAN
LED indicator: SATA hard disk is active
LED indicator: up to 2 hard disks are installed in the NVR and connected well
Insert a compatible USB flash drive for video backup.
Note: For the list of compatible USB flash drives, refer to the full manual on the
CD-ROM.
Insert a mouse (included).
This port is used to connect a storage device supporting eSATA interface; for
instance, an external disk array.
Connect to internet via an 8P8C (RJ45) network cable
Connect to local IP cameras via an 8P8C (RJ45) network cable.
NVR5
4
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido