Quick Operation - Velleman NVR5 Guía Rápida

3. To assign a channel to a remote IP camera, click URI to enter the address of the camera and its port
number.
4. Click SETUP to enter the access information of the camera.
5. Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.
6. Click GET TYPE to detect the camera and make sure the access information is correct.
7. Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).
Note: The available options depend on the camera you want to connect.
8. Click GET TYPE to detect the camera and make sure the access information is correct.
9. Optional: for a camera with audio recording, set AUDIO to ON or OFF.

10. Quick Operation

Switching off and Rebooting
To power off or reboot the NVR:
• In the Quick Operation menu, click
Viewing a Channel in Full-Screen Mode
You can view a channel in full screen mode as follows:
Click directly on the channel image to see that channel in full screen mode.
•
Double-click the image to restore the previous overview.
- or -
1. In the quick operation panel, click
2. On the control panel that appears, select the channel you want to display in full screen mode.
3. Click the button 4 – 6 - 9 - 12 or 16 to select another view.
Playing Recorded Video Clips
1. Make sure that manual and/or event recording is enabled: in the main menu, click
CONFIG) and select RECORD to check or adjust the settings.
V. 01 – 14/04/2014
NVR5
and then click (power off) or
.
9
(reboot).
(ADVANCED
©Velleman nv