Dioptric Compensation - Swarovski Optik SLC Serie Manual Del Usuario

To see a single round image, turn the two halves of the
binoculars until no irritating shadows can be seen.
3.3 ADJUSTMENT OF FOCUSING
It is possible to bring every subject
into focus from the shortest adjust-
ment distance (see technical data
sheet) to infinity by turning the
focusing wheel.
In the infinity position the little
nose of the focusing wheel is at
the top.

3.4 DIOPTRIC COMPENSATION

To achieve optimal image quality, the possibly varying
visual acuity between the left and right eye must be
corrected.
Use with equal acuity of both eyes:
1. Pull the focusing wheel outwards.
2. By turning the focusing wheel, set the dioptric scale
to "0".
3. Push the focusing wheel back in.
16
SLC / EN SLC / DE
Use with varying acuity of both eyes:
1. Look through the left ocular with your left eye and
turn the focusing wheel to focus sharply on a selected
object.
2. Pull the focusing wheel outwards.
3. Now look at the same object through the right ocular
with your right eye and again adjust the focusing wheel
to attain optimal clarity.
4. Press the focusing wheel back in again.
Tip: Please note your personal dioptric setting on the diop-
tric scale. With it you may adjust your individual dioptric
setting anytime.
3.5 TRIPOD CONNECTOR
Remove the covering for the tripod connector thread on
the underside of the binoculars using a small coin. To
mount the binoculars on a tripod, you will need the tripod
adapter for SLC, which is sold separately as an accessory.
4.
ASSEMBLY INSTRUCTIONS FOR
OBJECTIVE LENS COVER
SLC / EN SLC / DE
17