Dioptric Compensation - Swarovski Optik SLC 56 Manual Del Usuario

To see a single round image, turn the two halves of the bino-
culars until no irritating shadows can be seen.
3.3 ADJUSTMENT OF FOCUSING
It is possible to bring every subject
into focus from the shortest adjust-
ment distance (see technical data
sheet) to infinity by turning the focu-
sing wheel.
In the infinity position the little nose of
the focusing wheel is at the top.

3.4 DIOPTRIC COMPENSATION

To achieve optimal image quality, the possibly varying visual
acuity between the left and right eye must be corrected.
Use with equal acuity of both eyes:
1. Pull the focusing wheel outwards.
2. By turning the focusing wheel, set the dioptric scale to "0".
3. Push the focusing wheel back in.
18
SLC / EN SLC / DE
Use with varying acuity of both eyes:
1. Look through the left ocular with your left eye and turn the
focusing wheel to focus sharply on a selected object.
2. Pull the focusing wheel outwards.
3. Now look at the same object through the right ocular with
your right eye and again adjust the focusing wheel to attain
optimal clarity.
4. Press the focusing wheel back in again.
Tip: Please note your personal dioptric setting on the dioptric
scale. With it you may adjust your individual dioptric setting
anytime.
3.5 TRIPOD CONNECTOR
Remove the covering for the tripod connector thread on the
underside of the binoculars using a small coin. To mount the
binoculars on a tripod, you will need the tripod adapter for
SLC, which is sold separately as an accessory.
4. ASSEMBLY INSTRUCTIONS FOR
OBJECTIVE LENS COVER
SLC / EN SLC / DE
19