Display Setting; Clock Setting - Honda XRE 190 Manual Del Propietário

XRE 190

display setting

You can adjust the two settings:

Clock setting

Q
Backlight brightness adjustment
Q
Ordinary display
Clock setting
Backlight brightness adjustment
Press and hold sEL button and sEt button
Press the sEt button
The established setting can also be set by turning the
ignition switch to the OFF position.
The control is automatically switched from the setting
mode to the ordinary display if the button is not
pressed for about 30 seconds. Even in this case,
established setting is maintained.
I. clock setting
Turn the ignition switch to the ON position.
Press and hold sEL and sEt buttons until the hour
digits start flashing.
Press sEL button until the desired hour is displayed.
Press and hold sEL button to advance the hour
fast.
15