Tripp-Lite SmartPro RM Manual Del Propietário página 5

Mounting (Tower)
Mount all UPS models in an upright, tower position using included hardware. The user must
determine the fitness of hardware and procedures before mounting.
1 Stand your UPS on its side with the LED/Control panel
at the top. Attach one rack mounting ear
of the UPS using included screws
mounting ears to the floor with user-supplied
hardware.
2
Rotate the LED/Control panel to view it easier while the
UPS is tower mounted. Insert a small screwdriver, or
other tool, in the slots on either side of the panel. Pop the
panel out; rotate it; and pop the panel back in place.
Note: For additional stability, order the
2-9USTAND expandable tower stand accessory.
to each side
A
. Attach the rack
B
4
1
2
B
A