Steelcase CISCO DX80 Manual De Instrucciones página 16

®
Appendix A
Relocating the IEC duplex
1.
Remove the three (3) allen head maching
screws and revove steel pan assembly.
2.
Remove the two (2) phillips head screws that
secure the IEC duplex.
3.
Reposition IEC duplex on opposite side
(as shown) and reinstall the two (2) phillips
head screws that were removed in Step 2.
4.
Reinstall steel pan assembly with the
three (3) allen head machine screws that
were removed in Step 1.
1
ALLEN HEAD
MACHINE SCREW
STEEL PAN
ASSEMBLY
IEC DUPLEX
3
IEC DUPLEX
2
Page 16 of 16
23466201 Rev E