Maintaining The Soft Roller - Shark Slim Upright NV200 Serie Manual De Instrucciones

MAINTENANCE - CONT.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing.
WARNING: When
cleaning brushroll,
be sure to not cut
anything other than
hair, string, fibers, or
other debris.
TIP: Ensure the bottom
of the floor nozzle is
completely sealed and
locked before using.
NOTE: Wash the soft roller as
needed. Use only water, and
let air-dry completely for at
least 24 hours

MAINTAINING THE SOFT ROLLER

1
Slide the Soft Roller access button up to remove the soft
roller.
17
1-800-798-7398
STEP 1 STEP 2
2 Use scissors to remove any string, carpet fibers, or hair that may be wrapped around the soft
roller. You can also tap loose debris off the soft roller or wipe it clean with a dry towel.
3 Reinstall the soft roller by sliding it into place in the front of the nozzle.
STEP 3
18
s h a r kc l e a n . c o m