Luminous Intensity Measurement - koban KDL-02-LED Manual Del Usario

KDL-02-LED
LED Light Meter
press or
NO.1---NO.2 until NO.99. Press the
second to disable this feature.
. CLEAR (clear memory)
When power is off, press
screen will display "Clr" which means the memorized data is
erased.

7. Luminous Intensity Measurement.

1. Press the button
2. Remove sensor cap and place the sensor perpendicular to the
light.
3. Press button for more than one second.
4. Press or
5. Press button for less than one second.
6. Press or
center of lamp and measurement base level.
7. Press button for the less than one second.
8. Read the display.
9. Press button for more than one second to disable the
10
Keys to review all the stored values, for example,
and
to turn power on or off.
button to select ft (feet) or (meter).
button to set the distance between the light
button for more one
button together, then the
www.grupotemper.com