Instruction Manual; Ac Voltage (V) Measurement - koban KPF 01 Manual De Instrucciones

Operating instructions

AC voltage (V) measurement

1. According to the connection mode as above Table , switch the function
switching knob to V~, select corresponding sockets from V,COM terminal,
and insert the test wire.
2. Connect the two test probes V1, COM to the power source or load to be
tested. The meter will automatically test and display the result, and the
present harmonics percentage will be shown on the following line.
3. Under voltage test mode, press MAX/MIN button to view Max or Min
value
4. Press MODE button to show harmonics percentage on LCD, and the total
harmonic distortion ratio F and R will be cyclically displayed. Press ▲/▼
button to display value of each measurement of the harmonic.
www.grupotemper.com
Power harmonic clamp meter
m
KPF-01
V
AC
Instructions manual | 25