Am/Fm Reception; Rds; Placement; Cleaning - Tivoli Audio Albergo Manual Del Usuario

2. Select "Settings" (depending on software version).
3. Select "General".
4. Select "Bluetooth".
5. Switch Bluetooth "On" to initiate searching.
6. Select "Tivoli Bluetooth (Not Paired)" when it appears on the display. If you are
prompted to enter a PIN, enter "0000". "Tivoli Bluetooth" will change from "Not Paired"
to "Connected".
7. You will hear a ring tone from the Albergo and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/
iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check
the settings in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the
Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of "Tivoli Bluetooth" on
your iPhone/iPod touch/iPad display and select "Forget this Device", then repeat the Pairing
process. Depending on your device, you may need to make multiple attempts at Pairing
and/or Connecting to the Albergo, but please give your device adequate time to Pair or
Connect before repeating the process.
When streaming music, you can press the blue arrow to the right of the next track button >>/ on
the iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and Bluetooth.
NOTE:
• The Albergo will remember pairing information for up to 8 devices. Additional de-
vices can be paired, but the least-recently used device will be replaced by the newly
paired device.
• If the audio drops out or stops during playback, move your device closer to the Al-
bergo, or check to be sure another wireless device is not interfering with the signal.
• When switching from Bluetooth to AM or FM, you may need to re-adjust (lower) the
radio's volume level.
AM/FM Reception
The included external FM antenna will provide good reception. In strong FM signal loca-
tions, reducing the antenna's length may provide better reception. This antenna has no
effect on AM reception.
If you are using the Albergo together with the optional Albergo Speaker for stereo sound and
you are listening to a noisy FM station, press the Mono button on the remote control, as this
might make the FM station more listenable. The display will show an "M" when in mono.
For the AM band, since the AM ferrite rod antenna is internal, rotate the Albergo for best
reception. An optional external wireless AM antenna may provide improved AM reception.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household
appliances, electric blankets, computers, CD players, and other electronic devices can also
adversely affect reception or inject noise. If you experience this, move the Albergo further
from the offending device or plug it into an electrical outlet not shared by another device.
14 – ENGLISH