Guide to Features (Remote Control)
1. POWER: Press briefly to power
the Albergo off or on. The radio
will power on to the last source
used.
2. MUTE/SNOOZE: Press to mute
the audio while the unit is play-
ing; press again or adjust the
volume to restore sound. Press
to mute the alarm for 10 min-
utes after the alarm sounds. A
icon will show on the dis-
play when Snooze is active. The
Snooze time is not adjustable.
Pressing the Snooze button
again while still in Snooze mode
will re-set the Snooze timer back
to 10 minutes.
3. ALARM: With the Albergo
powered on, use the pq and
Select buttons to adjust and
set the alarms. Please also
see "How to Change Alarm Settings and Set the Alarm Via the Main Menu" for
additional very important Alarm settings.
4. SLEEP: Press repeatedly to activate the amount of time the radio will play before it
turns off automatically, and press the Select button on the remote control to select that
time. A small clock face
cancel Sleep, press the Sleep button until the display shows "Off".
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the
source mode you are in.
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to recall
the station associated with that specific preset. The preset number will be indicated on
the display. There are 5 presets for each band.
8. VOLUME +/–: Press the Volume + button to raise the volume level or the Volume – button to
lower the volume level. If the audio ever sounds distorted, lower the volume level to
avoid damaging the speaker. Adjusting the volume while the Albergo is muted will
cancel the muting.
9. pq/TUNE +/-: Press p or q briefly to auto scan to the next station detected. The
display will show "Scanning..." See "Auto Scan" under the section marked "Menu" to
disable Auto Scan and tune stations manually.
10. t u: The right arrow button duplicates the Select button. The left arrow button moves
you to the previous page in certain menu items.
11. MENU/SELECT: Press to enter the main menu within each source mode and press
briefly to select items within the menu. For more, see the sections below marked
"Menu" for AM, FM, Bluetooth, and Auxiliary Menus.
10 – ENGLISH
4
2
3
11
13
8
will show on the display when the Sleep timer is active. To
5
1
6
7
9
12
10