Wall Mount Installation - SPORTSTECH DeskFit200 Manual Del Usario

7.2 Wall mount installation

The wall holder can be mounted in two different ways. Either fixed firmly to the wall, or using an
adhesive strip.For fixed installation on the wall, please follow these steps:
Step 1: Find the appropriate location and height for your
installation, this should be about 1,285mm from the ground.
Mark the holes to be drilled using a pencil, then drill the holes
for your expansion screws.
Hint: Using a vacuum cleaner, drilling can be done without a
big deal of dust.
Step 2: Try to carefully embed the expansion screw.
Step 3: Align the expansion screw and finally tighten it.
38