1. Insert the fixed panel (C) into the metal track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the fixed glass panel (C). Adjusting the depth and/
or giving the fixed glass panel a slight angle allows for precise alignment with the door.
2. Smoothly slide the guide (N) at the bottom of the fixed glass panel (C) without securing.
3-4. Insert the roller guide track (O) into the guide (N). Place the roller guide track's anchor (P) onto the track (O).
5-6. Mark the positions of holes of the sliding door guide (N) and the roller guide track's anchor (P).
1
B
C
3
N
O
5
C
N
FIXED PANEL INSTALLATION
10
2
C
N
4
P
O
6
P