Installation; Installation Precautions; What's In The Boxes; Installing Your Refrigerator - Furrion FCR10DCBTA-BL Manual De Instrucciones

Installation

Installation Precautions

Location
• Allow 1 inch from the wall to the back
and sides of the refrigerator, which
allows the proper air ventilation.
• Avoid Installation:
− On weak surfaces unable to support
refrigerator when fully loaded.
− In direct sunlight and sources of
heat (stove, heater, radiator, etc.)
will hinder the performances of this
appliance.

What's in the Boxes

Make sure the unit and the accessories
are in the canton box. If anything
damaged or missing, contact your
dealer.
• Refrigerator x 1
• Instruction Manual x 1
• Warranty Card x 1
NOTE: The trim kits and screws for this
fridge is packed in another box, please
contact your dealer for these things.
• Trim Kit Case x 1
− Trim Kit x 4
− Trim strip x 2
− Screws 1set x 15

Installing Your Refrigerator

Adjust the leveling feet to keep the
refrigerator level.
Install the refrigerator in a convenient
location away from extreme heat and
cold. Allow sufficient clearance between
the refrigerator and side wall so the
door(s) will open without obstruction.
Select a space with strong level floor.
Allow 1 inches of space between the
refrigerator's side and the wall.
The appliance must be correctly
connected to the power supply.
MIN
24"
NOTE: The door should protrude at least
1" beyond the surrounding cabinets.
1. Install the top and side pieces of trim
kit onto the refrigerator (two screws
on top and 3 screws on left and right
side). (Fig. 1 and Fig 2 )
Fig. 1
MIN
59 "
7 8
/
MIN
24"
6